Fast-install housing for finished ceilings. Secured by pressure clips with no attic access required. UL listed and compact. Perfect for adding lighting to existing residential spaces.
The 4-inch Remodel Airtight Recessed Light Housing brings certified energy performance and installation reliability to existing ceiling upgrades. Engineered specifically for retrofit applications, it installs without attic access — making it the practical choice for finished rooms in need of a recessed lighting upgrade. Its combination of airtight construction, IC rating, and TP24 connectivity ensures every installation meets modern energy codes while minimizing labor overhead.
Model :408RA Wattage :MAX 15W Voltage :120V~277V Hole size :108mm Material :Galvanized Steel Certificate :UL, ETL, Title 24/JA8, FCC Warranty :5 Years
4″ Remodel Airtight Recessed Light Housing Retrofit-Ready. Energy-Compliant. Built for Finished Ceilings.
No Attic Access Required: Designed for remodel installations, this housing mounts entirely from below the ceiling — the ideal solution for occupied rooms, finished basements, and multi-story buildings. Direct Insulation Contact Approved: Full IC rating eliminates the mandatory clearance gap between housing and ceiling insulation, simplifying compliance on insulated ceiling retrofits. Energy-Code Ready Sealing: The airtight body prevents conditioned air from escaping through ceiling penetrations, directly supporting HVAC efficiency and Title 24 / IECC compliance.
6″ Remodel Recessed Light Can — TP24 Connector
The 6-inch Remodel Recessed Light Can delivers a durable, ETL-certified retrofit solution for upgrading existing ceiling installations without attic access. Constructed from galvanized steel and engineered with airtight, IC-rated performance, this housing meets the dual demands of structural longevity and energy code compliance. Whether refreshing a single room or executing a large-scale residential retrofit, this can provides the reliability and certification assurance that contractors and building inspectors require.
Model :608RA Wattage :MAX 20W Voltage :120V~277V Hole size :158mm Material :Galvanized Steel Certificate :UL, ETL, Title 24/JA8, FCC Warranty :5 Years
Galvanized Steel Durability: Heavy-gauge galvanized steel construction delivers long-term structural integrity and corrosion resistance — built to outlast the interior it illuminates. Certified Safety You Can Specify: ETL certification provides third-party confirmation that this housing meets North American electrical safety standards, giving architects, contractors, and AHJs objective confidence on every project. Retrofit-Optimized Design: Engineered for installation from below the ceiling plane, this can eliminates the need for attic access in finished rooms, multi-story buildings, and occupied renovation projects.
The 4″ Shallow Remodel Recessed Light Housing offers a professional-grade foundation for upgrading lighting in existing ceilings. Designed for tight shallow ceiling plenums, this recessed light can features a robust build and a standardized TP24 connector for easy integration into various architectures. It provides a reliable, high-performance solution for residential and commercial renovations where installation depth is limited. Model :408RICA Wattage :MAX 15W Voltage :120V~277V Hole size :109.5mm Material :Galvanized Steel Certificate :UL, ETL, Title 24/JA8, FCC Warranty :5 Years
Architectural Identity: A specialized remodel recessed light can designed for efficient installation in existing ceiling structures with minimal overhead space. Core Safety Features: Features a safety-focused IC-rated and Air-Tight design that ensures long-term structural integrity and optimal energy performance. Application Versatility: Optimized for kitchens, hallways, and living areas in residential homes, as well as professional hospitality and retail environments.
The 6″ Shallow Remodel Recessed Light Housing is a professional-grade solution designed for installation in existing ceilings with limited plenum space. Crafted from durable galvanized steel, this ETL-certified can features an IC-rated and Air-Tight design for maximum safety and energy efficiency. Equipped with a TP24 connector and quick-connect push wire nuts, it offers a seamless and efficient upgrade for residential and commercial lighting projects. Model :608RICA Wattage :MAX 20W Voltage :120V~277V Hole size :158mm Material :Galvanized Steel Certificate :UL, ETL, Title 24/JA8, FCC Warranty :5 Years
6″ Remodel Shallow Recessed Light Housing Professional Remodel Housing for Shallow Ceiling Plenums.
Easy Remodel Installation: Designed for quick installation into existing ceilings without the need for attic access. Thermal & Air Safety: IC-Rated for direct contact with insulation and Air-Tight construction to prevent energy loss. Durable Construction: Built with heavy-duty galvanized steel for long-term structural integrity and ETL-certified reliability.
Quick Connect Push Wire Nuts
The integrated junction box features tool-free quick-connect push wire nuts, enabling fast and secure electrical connections that significantly reduce labor time for contractors.
IC-Rated for Direct Insulation Contact
Engineered for safety, the IC-rated design allows the housing to be installed in direct contact with ceiling insulation without the risk of overheating.
Air-Tight Construction for Energy Efficiency
The Air-Tight build prevents conditioned air from escaping into the attic or plenum space, enhancing home comfort and reducing heating and cooling costs.
Installation Instructions
1. Making holes in drywall.（Flg 1） 2. Connect the wires.（Flg 2） 3. Embed and install. （Flg3） 4. Connect and light up. （Flg4）
Installation Instructions
1. Using template,scribe on ceiling in desired location，Using drywall saw,carefully cut hole marked location. (Fig.1) 2. Connect electrical wires (see instruction below) (Fig.2). 3. Insert housing into ceiling. (FIG.3) 4. Hold housing flush against ceiling and push out clips,to fasten fixture to the ceiling.Make sure to fully push clips until they lock into place. (Fig.4) 5. Install trim(see below). (Fig.5)
FAQ
Q1: Can this be installed without going into the attic?
A: Yes. This is a remodel housing, meaning it installs through the ceiling opening from below — no attic access is needed.
Q2: Does the IC rating allow direct contact with insulation?
A: Yes. The IC rating specifically certifies safe, direct contact with ceiling insulation without any clearance gap requirement.
Q3: What connector does this housing use?
A: It uses a TP24 quick connector for fast, standardized connections to compatible LED trims and downlight modules.
Q4: Does this require attic access to install?
A: No. This is a remodel housing designed for installation entirely from below the ceiling — no attic access required.
Q5: What does ETL certification mean for this product?
A: ETL certification is a recognized third-party mark confirming the housing has been independently tested and verified to meet applicable North American electrical safety standards.
Q6: Can this housing be installed in an insulated ceiling?
A: Yes, it is IC-rated and certified for direct contact with thermal insulation.
Q7: Does it require special tools for electrical wiring?
A: No, the junction box includes quick-connect push wire nuts for fast, tool-free installation.
Q8: Is this model suitable for new construction projects?
A: This specific model is optimized for remodel projects in existing ceilings; please refer to our new construction series for bare-frame installations.
Q9: Can this housing be used in a finished ceiling?
A: Yes, the remodel clips are designed to secure the housing to an existing ceiling through a standard cutout.
Q10: Is it safe to have insulation touching the can?
A: Yes, the IC-rated certification ensures it is safe for direct contact with thermal insulation.
Q11: Does this housing prevent drafts from the attic?
A: Yes, the Air-Tight construction seals the ceiling opening to prevent air leakage and improve energy efficiency.
Explore our products
Tableware
Glassware
Sanitary Bathroom Ware
Diesel Generator Sets
LED Lighting
IEC Motors
NEMA Motors
Pumps
Cookie Consent
We use cookies to improve your experience on our site. By using our site, you consent to cookies.
Cookie Preferences
Manage your cookie preferences below:
Essential cookies enable basic functions and are necessary for the proper function of the website.
Name
Description
Duration
Cookie Preferences
This cookie is used to store the user's cookie consent preferences.
30 days
Statistics cookies collect information anonymously. This information helps us understand how visitors use our website.
Google Analytics is a powerful tool that tracks and analyzes website traffic for informed marketing decisions.
Contains information related to marketing campaigns of the user. These are shared with Google AdWords / Google Ads when the Google Ads and Google Analytics accounts are linked together.
90 days
__utma
ID used to identify users and sessions
2 years after last activity
__utmt
Used to monitor number of Google Analytics server requests
10 minutes
__utmb
Used to distinguish new sessions and visits. This cookie is set when the GA.js javascript library is loaded and there is no existing __utmb cookie. The cookie is updated every time data is sent to the Google Analytics server.
30 minutes after last activity
__utmc
Used only with old Urchin versions of Google Analytics and not with GA.js. Was used to distinguish between new sessions and visits at the end of a session.
End of session (browser)
__utmz
Contains information about the traffic source or campaign that directed user to the website. The cookie is set when the GA.js javascript is loaded and updated when data is sent to the Google Anaytics server
6 months after last activity
__utmv
Contains custom information set by the web developer via the _setCustomVar method in Google Analytics. This cookie is updated every time new data is sent to the Google Analytics server.
2 years after last activity
__utmx
Used to determine whether a user is included in an A / B or Multivariate test.
18 months
_ga
ID used to identify users
2 years
_gali
Used by Google Analytics to determine which links on a page are being clicked
30 seconds
_ga_
ID used to identify users
2 years
_gid
ID used to identify users for 24 hours after last activity
24 hours
_gat
Used to monitor number of Google Analytics server requests when using Google Tag Manager
